The USB ID Repository

The home of the usb.ids file

Main -> USB Devices -> Device UD:174c -> Subsystem UD:174c:5106

Name: ASM1051 SATA 3Gb/s bridge


Name: Transcend StoreJet 25M3


2011-09-11 14:42:20

Name: AS1051 USB 3.0 to SATA bridge

This is the ID of the ASMedia AS1051 USB 3.0 to SATA bridge with its default configuration (no or invalid NVRAM data). So if it is also found in a Transcend StoreJet 25M3, the vendor just used the default ID od did not use NVRAM at all. The entry should be changed to "AS1051 USB 3.0 to SATA bridge" or something like that, since the ID is not specific for the Transcend StoreJet 25M3.


2014-06-22 20:31:39

Do you know if it is a particular version of ASM1051? Maybe this ID is specific to ASM1051E or ASM1051U?


2014-07-19 00:55:04

I don't have any information on this but my chip is labeled


So I think this is not a ASM1051E or ASM1051U. Also the chip is in an cheap enclosure labeled LogiLink UA0107A. The enclosure is sold without claiming to be compatible with UAS or SATA 6G. Another evidence, it is most likely just an ASM1051.


2014-08-25 17:12:41

Name: ASM1051 SATA 3Gb/s bridge

Thank you very much. You are right, it is not ASM1051E.


2014-08-30 23:35:48

Ialso think name like "AS2105 USB 3.0 to SATA Storage Bridge" is better suited,
because external disc case with product name "ICY BOX IB-250StU3-BH" is identified
by id 0x174c:5106


2015-03-02 19:11:48

Name: ASM1051 SATA 3Gb/s bridge

AS2105 is a name taken from shoddy firmware, not hardware.


2015-03-07 04:07:14



Id Name Note

Add item